Firmware Updates - Panasonic DMP-MST60 Operating Instructions Manual

Firmware updates

Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
press the [SETTINGS] button on the remote
control
select "System" and press [OK]
select "Firmware Update" and press [OK]
select "Update Now" and press [OK]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, INFO LED and
POWER LED flash for 3 times (
will be displayed on the screen. Unit will restart
and the following screen will be displayed.
The firmware has been updated.
Current Version: x.xx
≥ To show the firmware version on this unit.
( 27, "Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
Connections and Settings
6), and "FIN"
RETURN
27)
- 12 -