Fujitsu Eternus DX80 S2 Instal Setup page 15

Initial Manual Setup - Network Environment

IP Address of the Master CM

In the event of an Ethernet link error of the Master CM MNT port, the IP
address is taken over automatically by the Slave CM MNT port

In a DX400 S2 system it is also possible to setup the network
environment for the FST port
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Allowed IP List
• Default Gateway must be set
• Defines all servers that are allowed to access the LAN port of the
ETERNUS DX S2 system
• Either Host IP Address and Netmask
• Or Network Segment Address and Netmask
14 Copyright Fujitsu Technology Solutions, Release August 2011