Page 3
ETERNUS DX, server, OS, Fibre Channel cards, and drivers. Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations used in this manual such as product trademarks and product names. For storage systems that are supported by the OS, refer to the Server Support Matrix of the ETERNUS DX.
Chapter 1 Workflow This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX" section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS. Required Documents "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel •...
Page 7
"2.3 Checking the WWNs" (page 13) • After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-...
When using a Fabric connection, complete the preparatory work and set up the Fibre Channel switch be- forehand. For setting details, refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connec- tion- (Fibre Channel) Fibre Channel Switch Settings" or "Fabric OS Administrator's Guide".
Driver or the Symantec Stor- age Foundation is used ® – Default – – Windows Linux VMware ESX PAN Manager Citrix XenServer Oracle VM Server for HP-UX – HP-UX – – FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2015 FUJITSU LIMITED P3AM-5332-15ENZ0...
– – *1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards. To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora- cle-brand Driver" sections in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fi- bre Channel) for Oracle Solaris".
Note that changing the "Load Balance" setting has no affect on non-HP-UX servers. 2.2.2.2 Reject INQUIRY from Unauthorized Host Only when using the VERITAS Volume Manager Dynamic Multipathing (VxVM DMP) function, select "Enable". FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2015 FUJITSU LIMITED P3AM-5332-15ENZ0...
Checking the WWNs Checking the WWNs Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS DX to the server. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2015 FUJITSU LIMITED P3AM-5332-15ENZ0...
Page 14
• operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information • in this manual.