Epson PowerLite Home Cinema 5025UB Quick Setup

PowerLite Home Cinema 5025UB
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.

Choose a location

Keep the projector level and place it at a height so its lens is even with the
top or bottom of the screen and is centered horizontally. If this isn't possible,
use the lens shift dials or the keystone correction buttons on the projector to
reposition the image (see "Adjust the image").
In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the online User's Guide for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online User's Guide.

Video device

Connect multiple video devices and use the Source buttons on the remote
control or the button on the projector to switch between them.
Computer
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Monitor port
Connect one end of a VGA cable to the projector's PC port, and the other end
to your computer's monitor port. If you are using a laptop, switch it to
external display (see "Troubleshooting").
HDMI cable
RCA video cable
Component video
cable
HDMI cable
VGA cable
Connect audio
Connect your device's audio output to your home theater receiver or powered
speakers.
Home theater system
Surround sound
Powered speakers
External speakers
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector.
3
Press the power button on the projector or the On button on the
remote control. The shutter opens and the power light flashes blue,
then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control twice, then
unplug it. You don't have to wait for the projector to cool down.
4
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit
the menu system.
Video source
Video cable
Receiver Projector
Video cable
Video source Projector
power button on the