Backup And Restore - D-Link DNS-722-4 User Manual

Section 3 - Configuration
Users can save the NVR configuration to a file and restore it when necessary. Ocassionally, restarting the NVR can
keep the system running smoothly. Reset the NVR to restore all configurations to factory default.
Save All the configurations can be saved as a
Configuration: file to the specified location. Click the Save
Configuration button to save the file.
Load User can restore the configuration file after reset
Configuration to factory default file.
File: Click the Browse button to select the
configuration file and restore it by clicking the
Restore Configuration from File button.
Restart: If the NVR is malfunctioning or crashes
unexpectedly, click the Restart button on the
NVR. Restarting the NVR will take about one
and a half minutes.
Reset to This will reset all configurations to factory
Default: default. User can select to preserve the IP or
DDNS, thus the remote connection will remain
after reset.
D-Link DNS-722-4/DNS-726-4 User Manual

Backup and Restore

46