Live Video - D-Link DNS-722-4 User Manual

Section 3 - Configuration
This section will enable you to configure and view the live video from your network cameras.
Setup Live View
Step 1: Click the LIVE VIDEO button at the top of the menu.
Step 2: Select a camera(s) from the camera list on the right and then drag it to the location to where you wish the
image to be displayed.
Step 3: Users can change the video display position by drag it to another position.
Note
1. The selected video will be marked with a green line.
2. Right clicking on the video will show the option to Toggle to Full Screen. Press the ESC button on the keyboard to return to normal display.
3. If the camera supports audio, users can check Enable Audio from the right click menu and listen to live audio of this channel.
4. If the camera supports PTZ, users can control the selected camera from the PTZ panel. Users can also right click on the video and check Enable Move to
control the PTZ function directly. Please note that when Enable Move is checked, the video will be marked with a red outline. This indicates that another
camera cannot be adjusted until the PTZ function has been deactivated.
Drag and Drop
or double click
D-Link DNS-722-4/DNS-726-4 User Manual

Live Video

53