Economy Period; Reception Mode; Reception Without Paper; Number Of Copies - Philips LaserMFD LFF 6080 User Manual

LFF6080

Economy period

This function allows you to defer a fax transmission to "off-
peak hours" and thus reduce the cost of your
communications.
The economy period, via the telephone network (at off-
peak hours), is preset by default from 7.00 pm to 7.30 am.
Nevertheless you may change this time slot.
To modify the economy period:
1 Press , enter 233 using the keypad.
2 Enter the hours of the new economy period (for
example 19:00-07:30) and confirm your choice
with OK.
3 To exit this menu, press
To use the economy period:
1 Select 32 - FAX / ECO TRANS.
2 Enter the call number and confirm with OK.
3 Adjust the contrast and confirm with OK.
4 Select the feed type, FEEDER or MEMORY and
confirm with OK.
5 You may enter the number of pages before
transmission and confirm with OK.
6 If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select NEXT and confirm with OK. Select
DONE when all pages have been scanned.

Reception Mode

This function enables you, if you have an external device
(telephone, answering machine) plugged in to the EXT
socket on your terminal, or to the telephone plug adapter,
to select the device receiving faxes and/or voice
messages.
You may choose between the following reception modes :
• MANUAL : the terminal does not receive any
documents automatically. When you answer your
telephone and realise that you are receiving a fax, you
should press the
the fax.
• FAX : the Fax reception mode is launched on the
terminal systematically.
• FAX-ANSWER. : the terminal handles reception of fax
messages automatically, the external device handles
reception of telephone communications automatically.
Press the #0 buttons on your telephone to cancel fax
detection.
To set the reception mode:
1 Press , enter 241 using the keypad.
Downloaded From ManualsPrinter.com Manuals
233 - SETUP / SEND / ECO PER.
.
32 - FAX / ECO TRANS.
button on the terminal to receive
241 - SETUP / RECEPTION / MODE
2 Select the required option and confirm with OK.
3 To exit this menu, press
If you have connected a telephone to
the EXT socket on your terminal or
to a telephone plug adaptor, we
recommend
reception mode to MANUAL.
Important
When you receive a call, you pick up
using this telephone and you hear
the particular fax tone. You can:
- press the
terminal or buttons #7 on your
telephone to receive the fax.

Reception without paper

Your fax offers you the possibility to either accept or
refuse document reception if your printer is unavailable
(no paper...).
If your fax printer is unavailable, you may choose between
two modes of reception:
• reception mode WITHOUT PAPER, your fax saves
the incoming messages in the memory,
• reception mode WITH PAPER, your fax refuses all
incoming subscribers.
To select the reception mode:
242 - SETUP / RECEPTION / REC. PAPER
1 Press , enter 242 using the keypad.
2 Select the option WITH PAPER or WITHOUT
PAPER and confirm your choice with OK.
3 To exit this menu, press
Paper out is indicated by a beep and
a message on the screen.
Received faxes are then stored in
Important
memory (icon
printed as soon as you add paper
into the feeder.

Number of copies

You may print incoming documents more than once (1 to
99).
To set the number of each document received:
243 - SETUP / RECEPTION / NBR OF COPIES
1 Press , enter 243 using the keypad.
2 Enter the wanted number of copies and confirm
with OK.
3 To exit this menu, press
At each document reception, your fax will print the
number of copies requested.
- 34 -
.
that you set the
button on your
.
flashing) to be
.