Connecting A Television Via The Component Signal (Ycbcr/Progressive Scan And Yuv) - Silvercrest KH 6507 Operating Manual

4
Insert the second white plug of the audio/video
RCA cable into the RCA socket for the left chan-
nel on the television.
5
Insert the red plug of the audio/video RCA cable into
the RCA socket FR on the DVD player.
6
Insert the second red plug of the audio/video RCA
cable into the RCA socket for the right channel on
the television.
Fig. 5 Connecting a television via composite video
7
Check in the operating manual of the television
whether additional settings must be configured on
the television.
Ô
On this topic, also refer to Section 9.5. "Configuring
the Video Output / TV Mode".
7.4.4. Connecting a Television via the Com-
ponent Signal (YPb/CbPr/CR/Progres-
sive Scan and YUV)
The YPb/CbPr/Cr sockets of the DVD player output
so-called "component signals". The component signals
are available in the form of ...
Ú
"YUV" signals (interlaced) and in the form of
Ú
"YCbCr" signals (full images/progressive scan).
Ô
On this topic, refer to Section 19. "Glossary /
Key Word Index".
The cabling for YCbCr/YPbPr/progressive scan and
YUV is identical. For both connection options, the tele-
vision must have two unused RCA sockets.
For YCbCr/YPbPr/progressive scan, the television (or
video projector) must possess the progressive scan
function. In case of doubt, consult the operating manual
of the television (or video projector).
12
For both variants – YCbCr/YPbPr and YUV – you require:
Ú
the included audio/video RCA cables and
Ú
two additional audio/video RCA cables. These are
available in audio/video stores.
To connect the DVD player to a television via component
video:
1
On the rear side of the DVD player, you will find
three coloured component out sockets Y, Pb/Cb and
Pr/Cr. Insert the red plug of the included
audio/video RCA cable into the RCA socket Pr/Cr.
2
Insert the second red plug of the audio/video RCA
cable into the component video IN socket Pr/Cr on
the television.
3
Insert the white plug of the audio/video RCA cable into
the RCA socket Pb/Cb on the DVD player.
4
Insert the second white plug of the audio/video
RCA cable into the component video IN socket
Pb/Cb on the television.
5
Insert the yellow plug of the audio/video RCA cable into
the RCA socket Y on the DVD player.
6
Insert the second yellow plug of the audio/video
RCA cable into the corresponding component
video IN socket Y on the television.
7
Pick up the two additional RCA cables. Insert the
white plug of the RCA cable into the RCA socket
FL on the DVD player .
8
Insert the second white plug of the audio/video
RCA cable into the RCA socket for the left chan-
nel on the television.
9
Insert the red plug of the audio/video RCA cable
into the RCA socket FR on the DVD player.
10
Insert the second red plug of the audio/video RCA cable
into the audio socket for the right channel on the televi-
sion.
Fig. 6 Connecting a television via component video