LG L320-BN Service Manual page 11

4. ADJUSTMENT AND TEST ORDER
1. Download part adjustment
1) MICOM DOWNLOAD
2) PR selection
2. Bad pixel adjustment
3. Final 1st test
1) Day and night function test
2) Communication test
3) Alarm and multi-function test
4. Final 2nd test (Maintain existing method)
1) Set and module external key operation test
2) W/B tracking test
3) Final VOUT test
4) Set dimension test
5) Test standard specification test
6) Multi-language OSD test
5. CAMERA ADJUSTMENT METHOD
5-1. ADJUSTMENT DOWNLOAD PART
(1) MICOM PROGRAM DOWNLOAD
ADJUSTMENT OBJECTIVE
ERROR
EQUIPMENT AND JIG
ADJUSTMENT METHOD
CAM EE
* DOWNLOAD METHOD
1. Connect the PC with the downloading
device
1) Connect the PC and EFP-RC download device with
the USB cable.
2) When the device is connected, use the power of
the PC to turn on the power of the EFP-RC down-
loading device.
3) When the device is connected, the USB driver for
the new device must be installed so that the com-
munication between the PC and device can be
enabled.
TO SAVE THE MICOM PROGRAM TO MICOM.
NOT DOWNLOADED
EFP-RC JIG, PC, INTERFACE BOARD
NUMBER OF MEASUREMENT LOCATIONS NUMBER OF ADJUSTMENT LOCATIONS ADJUSTMENT SPECIFICATION
4) USB driver exists in the CD and set the following
path.
3-2