Table of Contents
Advertisement
E
Check by means of the operating instructions
for a potential connected audio component if
settings to it are necessary in order to use it
with the DVD player.
No 4:3 or 16:9 image
A
Check by means of the televisions operating in-
structions, which image formats the television
has at its disposal.
B
Check to see if the settings in the OSD menu
match the available image format of the tele-
vision.
Remote control not functioning
A
Check to make sure that the remote control
batteries have been inserted into the battery
compartment with the correct polarity.
B
Check to see if the remote control batteries
are exhausted and, if necessary, change both
batteries.
C
Make sure that there are no obstacles located
between the remote control and the DVD player.
D
Be situated no more than five meters from the
DVD player when using the remote control.
Playback language/ Subtitle language do not
correspond to the settings in the OSD menu
The playback language/Subtitle language setting in
the OSD menu is not available on the inserted disc.
One or several functions can not be switched on
The selected function may not be available on all
DVDs/VCDs/S-VCDs! If you attempt to carry out a
function that is not available the symbol
displayed on the television screen.
None of the buttons on the appliance or on the re-
mote control are functioning/other malfunctions
A
Switch off the DVD player by pressing the
POWER button. Wait ten seconds, then press
the "Power" button again once to switch the
DVD player back on.
B
If the malfunction is still present: Reset the
DVD player to its default settings.
Contact one of our service partners in your area if
...
• the stated function defect can not be resolved
as described or
• other functional defects arise.
For this see chapter 18. " Important
warranty information " .
- 32 -
will be
Advertisement
Table of Contents
