Motorola VC6000 Series Quick Reference Manual page 18

16
4. Connect the red wire to the vehicle's positive power source. Place a
10 A SLO BLO fuse inside the fuse holder, connected in-line with the
Red Wire approximately 10 cm (4 inches) from the cable end.
5. Connect and turn clockwise to lock the Power Plug to Power Con-
nector (PWR) of the VC6000 series (See
The length of the cable is 3 m (9.8 ft.).
Vehicle Power Cable
Power Plug
6. When routing wires, slide Shrink Tubing over wires as required.
7. Connect the power terminals of the Vehicle Power Cable to the ter-
minals of the vehicle battery.
8. Reconnect the vehicle battery.
VC6000 Series Vehicle Computers
Back Features on page
10 A Fuse SLO BLO
Fuse Holder
Green Wire
7).
Black Wire
Red Wire
Shrink Tubing