Motorola VC6000 Series Quick Reference Manual page 22

20
Mounting the VC6000 Series on AC-powered Carts and
Stationary Installation
AC-powered carts and stationary installation are powered using an a 100
to 240VAC Indoor Power Supply Unit.
To connect power to the VC6000 series:
1. Connect a ground wire between the VC6000 series and the facility
ground system. The ground wire ring lugs should be connected to
the Ground Point (GND) on the back of the VC6000 series using M4
screw.
Grounding the unit is optional. To ground the unit, use a

NOTE
18AWG ground wire between the VC6000 series Ground
Point (GND) and the facility ground system. To avoid damage
to the boss threads, use only the supplied M4 screw.
AC Cord
12 V DC Cable
2. Attach the 12 V DC cable of the Indoor Power Supply Unit to the
Power Connector at the back of the VC6000 series and turn clock-
wise to lock. Rotate clockwise to lock the connector.
3. Connect the AC Cord into the Indoor Power Supply Unit.
VC6000 Series Vehicle Computers
100-240 V AC / 50-60 Hz Power Outlet
Indoor Power Supply Unit
(For indoor use only in dry locations)
Power Connector
Ground Point
GND