JVC FS-P550 Service Manual page 16

3.1.13 Removing the power transformer
(See Figs.22 and 23)
• Prior to performing the following procedures, remove the side
panels L/R, front panel assembly, top panel, rear panel and
main board.
(1) From the forward side of the power supply board, discon-
nect the wires from the connectors (CN102, CN103). (See
Fig.22.)
Reference:
Remove the tuner , video board and the power supply
board as required. (See Figs.10, 11, 13 and 16.)
(2) From the top side of the main body, remove the four screws
S attaching the power transformer to the bottom chassis.
(See Fig.23.)
1-16 (No.MB229)
CN103
CN102
Fig.22
Power transformer
S
Fig.23
Power supply board
Bottom chassis
S
S