Sony Handycam DCR-DVD92E Operating Manual page 18

Step 2: Charging the battery pack (continued)
To remove a battery pack
Slide the BATT release button in the
direction of the arrow while pressing down
the projection in the center of the BATT
release button (

towards the back of your camcorder, then
remove the battery pack (
Projection
BATT release
button
• When you remove the battery pack, make
sure that none of the respective lamps of
the POWER switch (p.20) is on.
When storing the battery pack
Use up the battery pack completely if
you do not intend to use it for a long time
(p.107).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
Charging time (full charge)
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
*
NP-FP50
NP-FP70 **
NP-FP90
* S upplied with the models except for DCR-
DVD403E/DVD803E
**Supplied with DCR-DVD403E/DVD803E.
18
), slide the battery pack
).

Charging time
130
160
220
.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
For DCR-DVD92E/DVD602E/DVD653E
Continuous
Battery pack recording
time
80
NP-FP50
85
(supplied)
90
170
185
NP-FP70
190
300
NP-FP90 335
345
For DCR-DVD202E/DVD203E/DVD703E
Continuous
Battery pack recording
time
75
NP-FP50
85
(supplied)
90
160
180
NP-FP70
190
290
320
NP-FP90
345
For DCR-DVD403E/DVD803E
Continuous
Battery pack
recording time
55
60
NP-FP50
60
120
NP-FP70
125
(supplied)
130
215
230
NP-FP90
235
Typical
recording
time
35
40
40
80
90
90
145
165
170
Typical
recording
time
35
40
40
70
85
90
140
155
170
Typical
recording time
25
25
25
55
60
60
105
110
115