If you record under the following conditions:
Top: When the LCD backlight turns on.
Middle: When the LCD backlight turns off.
Bottom: Recording time when recording with
the viewfinder while the LCD screen is closed.
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
For DCR-DVD92E/DVD602E/DVD653E
LCD screen
Battery pack
opened*
NP-FP50
105
(supplied)
225
NP-FP70
400
NP-FP90
For DCR-DVD202E/DVD203E/DVD703E
LCD screen
Battery pack
opened*
NP-FP50
90
(supplied)
190
NP-FP70
345
NP-FP90
For DCR-DVD403E/DVD803E
LCD screen
Battery pack
opened*
90
NP-FP50
NP-FP70
190
(supplied)
345
NP-FP90
* When the LCD backlight turns on.
On the battery pack
•
•
•
LCD screen
closed
125
•
265
475
On the charging/recording/playback time
•
•
LCD screen
closed
•
110
235
On the AC Adaptor
•
415
•
LCD screen
closed
•
105
PRECAUTION
225
•
400
Before changing the battery pack, slide the
POWER switch up to OFF (CHG).
The CHG (charge) lamp flashes during
charging, or BATTERY INFO (p.37) will not
be correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged.
(For BATTERY INFO only.)
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when
the mains lead is disconnected from the wall
socket.
We recommend that you use an NP-FP70 or
NP-FP90 battery pack when a video light
(optional) is attached.
Times measured with the camcorder at 25 °C
(77°F). (10-30°C (50-86°F) is recommended.)
Available recording and playback time will be
shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
19