Message Client; Changing Forward/Do Not Disturb Setting; Storing Names And Numbers In Personal Speed Dialling - Panasonic KX-NS700 User Manual

3.2.1 User Programming

Message Client

Item
Message Client Display
Language

Changing Forward/Do Not Disturb Setting

You can change your extension's Forward/Do Not Disturb settings for outside and intercom calls in the
Telephony Feature tab of the Edit User screen.

Storing names and numbers in personal speed dialling

You can set frequently dialled numbers using two-digit speed dialling numbers (00–99). A maximum of 100
Personal Speed Dialling numbers can be programmed at your extension for your personal use.
340 User Manual
Specifies the language of information generated by the UM system for the
mail (IMAP) client.
1. In the Telephony Feature tab, set Forward/Do Not
Disturb as follows:
•
•
Note
2. Click OK.
1. In the Telephony Feature tab, click Speed Dialling
View/Edit.
2. The available speed dialling numbers are shown in sets
of 20. Select the desired set from Index.
3. Enter the name of the Personal Speed Dialling number
to call in Speed Dialling - Personal Name (max. 20
characters).
4. Enter the number to be dialled by the Personal Speed
Dialling number in Speed Dialling - Personal Number
(max. 32 digits consisting of 0–9,
[Secret], P [Pause], and F [Flash]).
Description
For Outside Calls:
To specify the forward type, select the desired type
from the For external calls drop-down list, then
enter the telephone number or select Phone
(Home) or Phone (Mobile)
*1
destination.
For Intercom Calls:
To specify the forward type, select the desired type
from the For internal calls drop-down list, then
enter the telephone number or select Phone
(Home) or Phone (Mobile)
*1
destination.
*1 These phone numbers are set in the Contact tab of the Edit
User screen.
To apply settings to both outside and intercom calls,
click For both internal calls and external calls.
When you select this, the setting of For external
calls is applied to both outside and intercom calls.
to specify the forward
*1
to specify the forward
*1
, #, T [Transfer], [ ]