Kenwood DDX6015BTR Instruction Manual page 46

SETTINGS SETTINGS
<Clock>
Adjust the clock time. (Page 5)
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<Remote Sensor>
• ON (Initial): Activates the remote sensor.
• OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 42)
<Bluetooth Setup>*
1
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of registered devices. You can connect the device
or delete the registration. (Page 32)
• PIN Code: Changes the PIN code of the unit.
(Page 31)
• Device Name: Shows the device name to be
shown on the Bluetooth device— "DDX****".
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only: From front speakers only.
– All (Initial): From all speakers.
46
• Auto Pairing:
– ON (initial): Establishes pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
<DAB Setup>*
2
• L-Band Tuning:
– ON: Receives the L-Band width during Digital
Audio reception.
– OFF (initial): Cancels
• Antenna Power:
– ON (initial): Supplies the power to the DAB
aerial.
– OFF: Cancels
<AV Key Long Press>
Assigns the function of the AV button when held.
• V-OFF (Initial) : Turns off the screen. (Page 8)
• APPs: Displays the APPs screen.*
• R-CAM : Displays the picture from the rear view
camera. (Page 28)
<DivX® VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
<Security Code>
Register the security code for the unit. (Page 4)
<SI>
Activate or deactivate the security function.
(Page 5)
<Serial Number>*
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 43)
<Steering Remote Controller>*
Assign the functions to the keys on the remote
controller of the steering wheel. ( Contact your
Kenwood dealer for details.)
<System Information>
Displays the version information of the software.
You can update the software. (Page 43)
* Only for DDX6015BTR/DDX4015DAB/DDX4015BT/DDX4015BTR .
1
*
2 Only for DDX4015DAB.
Only displays the APPs screen when <AV Input> is set to
*
3
[iPod] (Page 17).
(Page 19)
3
* Only for DDX4015DAB/DDX4015BT/DDX3015.
4
4
4