Wwan Module - HP Mini 10 Maintenance And Service Manual

WWAN module

Description
HP hs2340 HSPA+ Mobile Broadband Module
HP lc2000 HSPA Mobile Broadband Module
HP lc2010 HSPA Mobile Broadband Module
CAUTION:
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore device functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the WWAN module:
1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE:
The #2 WWAN antenna cable is connected to the WWAN module "Aux" terminal.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WWAN module to the system board.
(The WWAN module tilts up.)
Downloaded from LpManual.com Manuals
To prevent an unresponsive system, replace the wireless module only with a wireless
Battery on page
WLAN module on page
The #1 WWAN antenna cable is connected to the WWAN module "Main" terminal.
50).
52).
Component replacement procedures
Spare part number
632155-001
612599-001
612600-001
55