Heat Sink - HP Mini 10 Maintenance And Service Manual

Heat sink

Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
●
●
●
●
Remove the heat sink:
1. Remove the two Phillips PM2.0×4.6 screws (1) that secure the heat sink to the system board.
Downloaded from LpManual.com Manuals
Battery on page
Service cover (see WLAN module on page
Keyboard (see Keyboard on page
Top cover (see Top cover on page
System board (see System board on page
Fan (see Fan on page 77)
50), and then remove the following components:
52)
61)
67)
74)
Component replacement procedures
Spare part number
651898-001
79