Connecting Peripheral Devices - Fujitsu Primergy BX600 Start Manual

5

Connecting peripheral devices

Peripheral devices, such as the keyboard and mouse, etc., are connected to the server in the following
order.
���������������������
���������
����������
�������
�����������
����������������������
�������������
- Use a power cable that meets your country's standard.
- Connect cables with enough allowance for operation while the device is pulled out from the rack.
n After connecting the power cable
After connecting the power cable, secure the power cable to one of the handles on the rear of the chassis with the
release tie. This prevents the power cable from being disconnected if the chassis is moved forward.
�����������
�����������
�����������������
���������
�������������
���������������������
������
�����������
����������������������
���������
��������������������
�� ������������
- When disconnecting the chassis power cable make sure
to disconnect the power connector on the chassis.
- When securing the power cable with the release tie,
make sure to secure it in a location that will not interfere
with removal of the power unit.
- When expanding the power unit, make sure to use the
release tie included with the chassis to secure the power
cable.
4
������������
���������������