Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place.
Safety Information • To avoid small children and pets unintentionally switching the appliance on, we recom- mend activation of the child safety device. General safety • The appliance may only be installed and connected by trained, registered service engi- neers. •...
Description of the appliance Description of the appliance Cooking surface layout Induction cooking zone 2300 W, with power function 3200 W Induction cooking zone 2300 W, with power function 3200 W Induction cooking zone 2300 W, with power function 3200 W Control panel The cooking surface is divided into three cooking zones.
Description of the appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function. Do not cover other sensor fields. If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.
Operating the appliance Control bar The control bar is a special Touch Control field. The control bar is touched where the desired heat set- ting is positioned. The heat setting is shown in the display. Correct to the left or the right, if neces- sary.
Operating the appliance Control panel Display To switch on Touch To switch off Previous heat setting (not automatic warm-up or power Touch function) STOP+GO does not stop timer functions. STOP+GO controls the entire control panel apart from the sensor field Using the automatic warm-up function All cooking zones are equipped with an automatic warm-up function.
Operating the appliance Heat setting Length of the automatic warm up [min:sec] Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel Display/Signal Switch on appliance. Do not set a heat setting. Touch for 4 seconds The child safety device is switched on.
Operating the appliance Control panel Display To switch off Touch a heat setting Power Management The cooking zones of the cooking surface have a maximum power available to them. Maximum power is reached if all cooking zones are set to a heat setting of 14.
Page 10
Operating the appliance Step Control panel Display Pilot light of the second cooking zone flashes Touch once Pilot light of the third cooking zone flashes Touch once If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
Tips on cooking and frying Switching off the acoustic signal Step Control panel field Acoustic signal Acoustic signal to acknowledge. Touch Acoustic signal stops. Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx.
Tips on cooking and frying Cookware material Suitable Aluminium, copper, brass Glass, ceramic, porcelain * Cookware for induction cooking zones is labelled as suitable by the manufacturer. Suitability test Cookware is suitable for induction cooking, if … • ... a little water on an induction cooking zone set to the highest heat setting is heated within a short time.
Cleaning and care Heat set- Cooking process suitable for Cook time Tips/Hints ting Simmering Simmering rice and 25-50 mins. Add at least twice milkbased dishes as much liquid as Heating up ready- rice, stir milk dishes cooked meals part way through cooking Steaming Steaming vegeta-...
What to do if... by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little washing up liquid. Finally, rub the appliance dry using a clean cloth . 2. Limescale rings, water rings, fat splashes, shiny metallic discolorations should be re- moved after the appliance has cooled down using cleaner for glass ceramic or stainless steel.
What to do if... Problem/Display Possible Cause Remedy Electronics fault Disconnect the appliance from and number are displayed the electrical supply for a few minutes (Take the fuse out of the house’s wiring system) If after switching on again, displayed again, call the cus- tomer service department Acoustic signal sounds when The control panel is wholly or...
Disposal The noises described are normal and do not refer to any defects. Disposal The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
Page 17
Safety information WARNING! Risk of injury from electrical current. • The electrical mains terminal is live. • Make electrical mains terminal free of voltage. • Follow connection schematic. • Observe electrical safety rules. • Ensure anti-shock protection by installing correctly. •...
Page 18
380 +1 min. 55 min. 5 min. 20 min. 5 min. 25 min. 38 min. 5 min. 5 min. 20 Rating Plate Modell 98030KF-SN Prod. Nr. 949 593 169 Typ 55 GDD E2 AG 230 V, 50 Hz 6,9 kW AEG-ELECTROLUX...
Service Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.