Items Relating To Recording Protection (Nos. 501 To; Items Relating To Recording Protection (Nos. 501 To - Sony SRW-5800 Operation Manual

Item number Item
404 CUEUP BY CTL
405 CUE MENU
DEFAULT MODE
select
406 CUE MENU
PREROLL OFFSET
407 AUTO REWIND
408 AUTO CUE UP

Items Relating to Recording Protection (Nos. 501 to ...)

Item number Item
501 STILL TIMER
502 TAPE
PROTECTION
MODE FROM
SEARCH
Setting Function
[capstan only] This setting is only active when item 602 is set to "CTL".
reel/capstan capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state during
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the setting is "reel/capstan", cue up
operations are done at high speed.
Select "capstan only" when editing precision has priority.
[page mode]
Selects the default mode when the CUE menu is opened.
extend mode
page mode: PAGE mode
extend mode: EXTEND mode
[0 sec] Sets the preroll time for a cueing up operation from the
CUE menu.
30 sec
[off]
Selects the rewind mode for the end of the tape.
on off: The tape transport stops at the end of the tape.
on: The tape is automatically rewound from the end of the
tape.
[off] Selects whether or not to cue up when switching from
on standby-off to standby-on.
off: No cue-up.
on: Cue up to the time code immediately before switching
to standby-off.
Setting Function
0.5 sec Select the amount of time after which the VTR to
5 sec automatically enters tape-protect mode, for the purpose of
10 sec protecting the video head and tape.
20 sec This is the time between stopping of the tape (stop mode or
30 sec still-picture mode in search mode) and the change to tape-
40 sec protection mode.
50 sec The selectable range of time is from 0.5 second to 30
1 min minutes.
2 min
3 min
4 min
5 min
6 min
7 min
[8 min]
30 min
[step fwd] Specifies the tape-protect mode to which the VTR changes
standby off from still-picture mode while searching (JOG/SHUTTLE/
tension release VAR).
The unit enters automatically the specified tape-protect
mode after the time specified in item 501 has elapsed.
step fwd: A two-second step advance is repeated in
standby off: The VTR enters standby off mode (standby is
tension release: The VTR enters tension release mode
cue up. (The maximum tape speed is ten times normal
tape speed.)
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
forward direction at 1/30 times normal tape speed.
canceled).
(tape tension is released).
151
Menu List