Items Relating To Recording Protection (Nos. 501 To; Items Relating To Recording Protection (Nos. 501 To - Sony SRW-5000 Operation Manual

Items Relating to Recording Protection (Nos. 501 to ...)

Item number Item
501 STILL TIMER
502 TAPE
PROTECTION
MODE FROM
SEARCH
503 TAPE
PROTECTION
MODE FROM STOP
504 DRUM ROTATION
IN STANDBY OFF
505 STILL TENSION
506 DRUM ROTATION
TIMER
164
Menu List
Setting Function
0.5 sec Select the amount of time after which the VTR to
5 sec automatically enters tape-protect mode, for the purpose of
10 sec protecting the video head and tape.
20 sec This is the time between stopping of the tape (stop mode or
30 sec still-picture mode in search mode) and the change to tape-
40 sec protection mode.
50 sec The selectable range of time is from 0.5 second to 30
1 min minutes.
2 min
3 min
4 min
5 min
6 min
7 min
[8 min]
30 min
[step fwd]
Specifies the tape-protect mode to which the VTR changes
standby off from still-picture mode while searching (JOG/SHUTTLE/
tension release VAR).
The unit enters automatically the specified tape-protect
mode after the time specified in item 501 has elapsed.
step fwd: A two-second step advance is repeated in
standby off: The VTR enters standby off mode (standby is
tension release: The VTR enters tension release mode
[standby off] Specifies the tape-protect mode to which the VTR changes
tension release to from the stop mode.
The unit automatically enters the specified tape-protect
mode after the elapse of time specified by item 501.
standby off: The VTR enters standby off mode (standby is
tension release: The VTR enters tension release mode
[off]
Sets the drum rotation to "on" or "off" during standby-off
on mode.
off: Drum rotation is stopped.
on: Drum rotation continues.
[normal] Sets the tape tension control in still-picture mode.
loose normal: Maintains the tape tension that ensures uneffected
loose: Sets the tape tension lower than that of the "normal"
1min When menu item 502 or 503 set to "tension release", or
2min when menu item 504 is set to "on", the drum motor of this
3min unit continues to rotate after tension release mode is
4min entered.
5min This menu item sets the time until the unit enters standby
10min off mode and the drum motor stops rotating after entering
15min tension release mode.
30min The selectable time ranges from one minute to eight hours.
1H
2H
3H
[4H]
8H
forward direction at 1/30 times normal tape speed.
canceled).
(tape tension is released).
canceled).
(tape tension is released).
playback even in still-picture mode.
(This is the normal setting for VTR operations.)
setting after the VTR enters still-picture mode. In this
case, picture playback is not ensured. (For long
standbys (e.g., LMS) in still-picture mode, this setting is
recommended.)