Panasonic KX-NCP500 Feature Manual page 373

Parameter
Answer by Mailbox
(Default)
AA
None
b.
Intercept Routing to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when a CO line call is
intercepted from an extension to the VPS. Therefore the caller can leave a message for the called
extension without knowing the mailbox number.
[Intercept Routing to the VPS Sequence Selection]
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be redirected
to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are intercepted
so that the caller can be directed to an extension rather than a mailbox. This can be performed by
selecting "AA" through system programming.
® 5.21 [3-8-1] VM(DTMF) Group—System Settings—
Sequence
Parameter
Answer by Mailbox
AA
None (Default)
Document Version 2013-05
Transmitted Command
In AA Service Mode
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
Transmitted Command
In AA Service Mode
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
19.1.5 Voice Mail DTMF Integration
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Switching to AA command (#8)
Others—Intercept Routing to the VPS
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Switching to AA command (#8)
Feature Manual 373