LG 47LV5500 Owner's Manual page 30

30
ASSEMBLING AND PREPARING
NOTE
Check the material of the wall and
y y
thickness of finishing material.
You can use the anchors and screws
y y
provided with the TV set for the wall
made with concrete, lightweight
concrete, soft fieldstone, hard fieldstone,
brick or cellular block.
Do not mount on the wall made with
y y
plaster board or medium density
fibreboard (MDF). In this case, the
anchor and screws must be inserted in
the concrete inside of finishing material.
If there is no concrete inside, you must
install a separate hanger first and fix the
anchors and screws.
For other cases, make sure that each
y y
fixed part can resist the pull-out load of
70 kgf (686 N) and shear load of 100 kgf.
4
Connect the Display Link Cable (for wall
mounting bracket; the longer one) to the
display link input on the back of the TV.
Then, mount the TV on the wall in direction of
the arrow.
5
Secure the TV with the wall mounting bracket
pushpin.
6
Place the stand base in a proper location and
connect it with the dsplay link cable.