Control Panel - Mitsubishi Electric AT-50A Instruction Book

Usage - Main Menu Settings

Control Panel

Main Menu > Control Panel
Main Menu > Control Panel > Display Format
1Setting the basic display settings on the HOME and MENU screens
Touch the 1 Display Format button on the [Control Panel] screen.
・ The [Display Format] screen consists of three pages (1/3 - 3/3). Use the 4
through the pages. After setting all the settings, touch the 5 Save button.
Display Format screen ： 1/3
4
To select the display language
1. Touch the 1 Language button on the [Display Format] screen (1/3).
2. Select a desired language from the language options (buttons
labeled 6 in the figure) on the pop-up screen.
3. Press the 7 OK button to return to the previous screen.
To select the temperature unit
Touch the 2 Temperature unit button on the [Display Format] screen (1/3) to switch between ºC and ºF .
50
1
2
3
4
buttons to flip
1
2
3
5
6
7
To show or hide the room temperature
Touch the 3 Room Temperature button on the [Display Format] screen (1/3) to switch between Show
and Hide .
Display Format screen ： 2/3
To show or hide the Cooling/Heating mode icon (during Auto mode)
when the operation mode is enabled
Touch the 8 Automatic Mode Display Setting button to switch between Show (
( ).
Example) [HOME] screen show show hide hide
To set the backlight timeout time
Touch the 9 Backlight timeout setting button to set the timeout time.
The back light will go off after a specified time of non-use.
* Touch the button repeatedly to select from the following settings.
1 min. → 3 min. → 5 min. → 7 min. → 10 min.
The backlight will remain lit as long as an error exists.
8
9
5
) and Hide
51