• Do not install or use the appliance where the only at the end of the installation. Make sure temperature is less than 0 °C or where it is that there is access to the mains plug after exposed to the weather. the installation. www.zanussi.com...
• Set a programme without the prewash phase handling of this product. For more detailed to wash laundry with normal soil. information about recycling of this product, please contact your local council, your • Always start a washing programme with the maximum load of laundry. www.zanussi.com...
Door handle Rating plate Feet for the appliance level Fixing plate kit (405517114) If you install the appliance on a plinth, secure the appliance in the fixing plates. Available from your authorized dealer. Follow the instructions supplied with the kit. www.zanussi.com...
Spin reduction button (Spin) – You change the programme while it oper- Temperature button (Temp.) ates. Display The display shows: A) The delay start. When you press the delay start button, the display shows the de- lay start time. www.zanussi.com...
The water temperature of the washing phase may differ from the temperature declared for the selected programme. 2) The default speed is 700 rpm. www.zanussi.com...
Page 8
With this option you can permanently have an a malfunction. extra rinse when you set a new programme. • To activate this function press the button “Rinse Hold” and the button “Extra Rinse” at www.zanussi.com...
To use liquid deter- gent: Using the detergent and additives 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to re- move the drawer easily. www.zanussi.com...
Page 10
You can change only some options before they dicator of the set function comes on. operate. Starting a programme without the delay 1. Press the button Start/Pause. The indicator start flashes. Press the Start button: 2. Change the options. www.zanussi.com...
• Button up pillowcases, close zippers, hooks • Obey the washing instructions that are on and poppers. Tie up belts. the laundry care labels. • Empty the pockets and unfold the items. • Do not wash together white and coloured items. www.zanussi.com...
Use a special product made for washing ma- smells go out. chines. Obey the instructions that you find on Drum the packaging of the manufacturer. Regularly examine the drum to prevent lime- Do this separately from the laundry wash. scale and rust particles. www.zanussi.com...
Page 13
1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Remove the water inlet hose 4. Remove the drain hose from the rear support and unhook it from sink or spigot www.zanussi.com...
Make sure that the connection of the water inlet hose is correct. The appliance does not Make sure that the sink spigot is not clogged. drain the water. Make sure that the water drain hose has no kinks or bends. www.zanussi.com...
Page 15
You can find the infor- ice. mation on the rating plate: model (Mod.), PNC If the display shows other alarm codes, activate (Prod.No.), Serial number (Ser.No.). and deactivate the appliance. If the problem continues, contact the Service. www.zanussi.com...
Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply Maximum load Cotton 6 kg Spin speed Maximum 1200 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. www.zanussi.com...