Yamaha CL5 Reference Manual page 207

7.
In each field, select the desired function or parameter.
NOTE
• With latched operation, the function will switch between active and inactive each time a trigger is
input from the external switch. In this case, we recommend that you use a non-locking type of
external switch.
• With unlatched operation, the function will be active only while the signal from the external switch
is at the high level or low level. In this case, you may use either a non-locking or a locking type
of external switch as appropriate for your needs.
8.
When you have finished making settings, press the OK button.
You will return to the GPI screen.
9.
Repeat steps 4 through 7 to specify functions and parameters for other ports.
NOTE
Settings in the GPI screen are common to all scenes. They can be saved as SETUP data.
Using GPI OUT
The GPI OUT ports of the GPI OUT connector allow you to control an external device by performing
operations on the CL series console.
1.
Connect an external device to the CL series console's GPI connector.
2.
In the function access area, press the SETUP button to access the SETUP screen.
3.
Press the MIDI/GPI button.
The MIDI/GPI screen will appear.
4.
Press the GPI tab.
207
Other functions
Reference Manual