Adjusting Ice Cube Thickness - Electrolux Ice Maker Service Manual

Adjusting Ice Cube Thickness:

Disconnect power to the ice maker before making any ice thickness adjustments.
1. Disconnect power to the unit.
2. Remove the screws securing the front access panel.
3. Locate the ice cube thickness adjustment dial on the control board. Turn the dial
clockwise (+ number) to thicken or counterclockwise (- number) to thin the ice bridge.
ACCESS PANEL SCREWS
WARMER
ICE CUBE THICKNESS
ADJUSTMENT
DIAL
DIAL IS FACTORY
SET TO +1
19