The warm-up time is more than 30 minutes, approximately.
When the monitor is in standby mode
As the OPERATE lamp lights in red in standby mode,
press the MONITOR I/1 switch of the controller.
The OPERATE lamp lights in green and the monitor enters
operation mode.
Settings
Selecting the Area
When you turn on the monitor for the first time after
purchasing it, select the area where you intend to use this
monitor from among the options.
When the area is selected, the menu item settings suitable
for the selected area are applied.
Default value for each area
5
4
3
3
Color
Temp
1North America
D65
2Latin America
Argentina
D65
PAL&PAL-N
Paraguay
D65
Area
Uruguay
D65
NTSC&PAL-
Other Area
D65
M Area
3Africa
Australasia
D65
Europe
Middle-East
NTSC Area
D65
4Asia Except
Japan
PAL Area
D65
D93
5Japan
3
1
2
Color
Setup
Component
Gamut
Level
Level
Emulation
BVM
7.5%
Betacam
SMPTE-C
SMPTE/
0%
BVM EBU
EBU-N10
SMPTE/
0%
BVM EBU
EBU-N10
SMPTE/
0%
BVM EBU
EBU-N10
BVM
7.5%
Betacam
SMPTE-C
SMPTE/
0%
BVM EBU
EBU-N10
BVM
7.5%
Betacam
SMPTE-C
SMPTE/
0%
BVM EBU
EBU-N10
SMPTE/
0%
BVM EBU
EBU-N10
27
Settings