Care And Maintenance; Filter/Sensor; Water Tank - Sharp DW-D20A Operation Manual

CARE AND
MAINTENANCE
IMPORTANT NOTICES DURING CLEANING
Please use the specified
cleaners

FILTER/SENSOR

Sensor
1
For heavy dust
Take the filter off
Take off the filter cover
from the cover
Filter
Attach the filter to the cover
(Securely place the 4
filter tabs)
Tab (4 places)
●
Clogged filter may cause reduced dehumidification or consume more electricity.
NOTE
●
Dust will accumulate inside the main unit without the filter which may cause malfunctions.
18
We recommend
periodical cleaning for
a long, clean and
sanitary use!
Do not use the following.
(Otherwise, the surface may be damaged or cracked.)
Thinner Oven cleaner Housing and furniture
Benzine Cleanser Synthetic detergent
Alcohol Bleach (Alkaline)
Once every two weeks
Remove the dust
Filter
with vacuum cleaner
Vacuum cleaner
Wash off the dust from the
net and dry it
(Remove gently with a small brush)
Filter
Use mild detergent
(dishwashing soap) in
lukewarm water for
Filter
heavier dusts.
cover
Reattach to the original place
Hole in main unit
Filter tab
●
Attach the filter with
mark upwards.

WATER TANK

1
Spray cleanser
Steel wool
Drain outlet
2
If float comes off
3
Check the direction of float, and then
insert the float.
(
Tank lid
4
●
NOTE
Be careful not to damage the float.
Always turn the operation "OFF" and
unplug the power plug.
[Otherwise, electric shock or injury may be caused]
Dispose water
Tank lid
and take the
tank lid off
Wash the
inside of the
tank
Dry the tank
with soft cloth
Check float
Pin
(
Magnet: Facing up
Facing outside of tank
Magnet
Float
Put the tank
lid on
WARNING
Once a week
●
Remove the lid slowly from the
corner.
●
Wash the tank with dishwashing
sponge.
●
Use mild detergent (dishwashing
soap) with lukewarm water if
necessary.
●
Check to see if the float is
securely attached.
Insert pin and
secure.
●
Be sure to tightly close the tank
lid. (To prevent water leakage)
19