Conference Group Call—Broadcast Mode - Panasonic KX-TDE100 Programming Manual

4.18 [2-9] System Options
Feature Guide References
None
ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for networks
that disconnect a call if an alert message is not received.
Value Range
Mode1: Disable
Mode2: Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
Conference Group Call—Broadcast Mode
Specifies whether only the original caller can speak or up to 8 people can speak at the start of a conference
group call.
Value Range
Disable: The original caller and up to 7 participants can speak at the start of a conference group call.
Enable: Only the original caller can speak at the start of a conference group call.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
5.27 [3-10] Conference Group
Feature Guide References
1.15.1 Conference Group Call
Option 6 (CTI)
Built-in Communication Assistant—System status retry interval timer
Specifies the length of time until the alive check is retried when no response is received, for First Party Call
Control CTI.
574 PC Programming Manual