3.48 [1-1] Slot—Port Property - EM Port—Connection
Command
Commands for the E & M channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
3.48 [1-1] Slot—Port Property - EM Port—Connection Command
Programming Manual References
3.47 [1-1] Slot—Port Property - EM Port
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
3.48 [1-1] Slot—Port Property - EM Port—Connection Command
Programming Manual References
3.47 [1-1] Slot—Port Property - EM Port
Feature Guide References
None
3.48 [1-1] Slot—Port Property - EM Port—Connection Command
PC Programming Manual
409