Setting Up Ad-Hoc Of The Station Mode - Asus E3060 WiFi-AP Solo User Manual

3.2.3 Setting up ad-hoc of the station mode

If there is no wireless access point in your environment, you can switch your
WiFi-AP Solo to the Ad-hoc mode to connect and communicate with other
wireless-enabled computers. Refer to section 1.4.3 for network topology.
1. Open the WiFi-AP Solo setup wizard by WiFi-AP Solo setup wizard by
right-clicking the system tray icon
selecting WiFi-AP Solo Wizard.
2. Select Station and click Next.
3. Select Ad-hoc and click Next. If
there is no Ad-hoc node in your
environment, you are directed to
Wireless Network Properties
page to create an Ad-hoc profile.
This will enable other wireless
stations to detect and connect to
your station.
4. Set up the operation
channel and the
wireless network
security settings. The
operation channel and
security settings must
be identical between
two Ad-hoc nodes.
Click Finish to apply
the settings and return
to the wizard.
and
3-9