Setting The Video Signal; Av Input; Starting Procedure - Pioneer AVH-X5790BT Owner's Manual

AUX source

Setting the video signal

When you connect this product to an AUX equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AUX input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM
30

AV input

.You can display the video image output by the device connected
to this product.
 External video component and the display on page 47
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.

Starting procedure

You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Set the setting to "On".
4 Display the AV source selection screen.
5 Touch [AV].
The image is displayed on the screen.
AV
21
6/10
Full
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AV].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
48