Table of Contents
Advertisement
System settings
Displaying the "System" setting
screen
1 Press
.
2 Touch
, and then
.
The "System" setting screen appears.
Setting the steering wheel
control
You can set the steering wheel control on the display via a wired
remote cable.
Power cord on page 44
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p This setting is available when turn all the sources off.
This setting is required for using the steering wheel remote
control function.
p You can set a function key to more than one steering wheel
key.
p You can set only one function key to a steering wheel key.
p If you make a mistake after connecting this product with the
supplied wired remote cable, please reset it.
p If this function does not work correctly, contact your dealer
or an authorized Pioneer Service Station.
p When you start to set, all the default key settings is automati-
cally cleared.
For steering wheel control adapter
for Pioneer users
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Steering Wheel Control].
3 Touch [W/o Adapter].
4 Touch [OK].
Registering function to each key
manually
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Steering Wheel Control].
32
3 Touch [W/o Adapter].
4 Touch the item to select the brand of your
vehicle.
5 Touch the item to set.
Follow the on-screen instructions to register the function setting.
# If you touch [Clear], all the settings is cleared.
Activating the Bluetooth audio
source
X2790BT
X5790BT
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On"
(default) or "Off".
Setting the ever scroll
When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display.
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Ever Scroll] to switch "On" or "Off"
(default).
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC6) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
p When the shift lever is aligned to the REVERSE (R) position
immediately after the system of this product is started up,
only the camera image will be displayed and the parking
assist guidelines and the message, "The video may appear
reversed" will not be displayed.
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
Setting rear view camera activation
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Camera Settings].
3 Touch [Back Camera Input] to switch "On" or
"Off" (default).
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
Setting rear view camera activation on page 32
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Camera Settings].
3 Touch [Camera Polarity].
●
Battery (default):
The polarity of the connected lead is positive.
●
Ground:
The polarity of the connected lead is negative.
Turning off the demo screen
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [Demo Mode] to switch "On" (default) or
"Off".
Advertisement
Table of Contents
