Back Panel - NEC DV11G User Manual

Back Panel

MONITOR Output Terminal
Always displays camera image.
RS-232C Terminal
Use this terminal when controlling
this equipment from a PC.
Built-in
Security Slot ( )*
1 2 3 4 5 6 7 8
Dip Switches
OFF
ON
1 2 3 4 5
These switches set the output mode of this equip-
ment. The settings become effective at power on.
Flip the switch up or down, using the tip of a
ballpoint or similar tool.
Dip switches 1 and 2
These switches set the resolution of RGB output.
SW1 SW2
ON ON 1024 768 (XGA)
ON OFF 800 600 (SVGA)
OFF ON 640 480 (VGA)
OFF OFF 1024 768 (XGA)
Dip switch 3
This switch selects a signal system outputted from
the Video image output terminal, S-video image
output terminal or Monitor output terminal.
ON NTSC
OFF PAL
Dip switch 4
This switch switches between RGB output and
Video output.
ON Video
OFF RGB
Dip switch 5
This switch sets output of the RGB monitor out-
put terminal 2.
ON Outputs the same signal as RGB moni-
tor output terminal 1.
OFF Outputs signals inputted from RGB
input terminal.
Dip switch 6
This switch selects the setting of white balance
to be turned on at power on.
ON User adjusted value
OFF Factory setting
Dip switches 7 and 8
Not used.
Items in a ruled box ( ) indicate factory default settings.
USB Port
Use this terminal when taking the contents of
image memory of this equipment into a PC.
S-video Image Output
Terminal
(S-VIDEO OUT)
Connect an S-video cable
when displaying images
6 7 8
from this equipment on a
TV monitor or the like.
RGB Monitor Output Terminal 1 (RGB-OUT 1)
(mini D-sub, 15-pin)
Connect the RGB signal cable when outputting
images from this equipment to a projector or the
like by RGB output.
* This security slot supports the MicroSaver
mark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware
Inc.
RGB Input Terminal (RGB-IN)
(mini D-sub, 15-pin)
Connect the RGB signal cable when projecting
images from an external image equipment via
this equipment.
Video Image Output Terminal (VIDEO OUT)
Connect a video cable when displaying images
from this equipment on a TV monitor or the like.
RGB Monitor Output Terminal 2 (RGB-OUT 2)
(mini D-sub, 15-pin)
Always outputs images from the RGB input termi-
nal.
Same output as the RGB monitor output terminal 1
may be produced by Dip switch 5 setting.
® Security System. MicroSaver
E-10
Power Switch
AC IN Terminal
Connect the power cord.
® is a registered trade-