Setting Forced Dhw; Setting Holiday Mode - Mitsubishi Electric ATW PAR-WT40R-E Operation Manual

5.2. Setting Forced DHW

Holding down the
more to set the indoor unit to enter the
forced DHW mode.
When the forced DHW mode ends, the
indicator goes out.
Note)
When the indicator blinks after the button is held down for 3 seconds or more, this indi-
cates that the indoor unit that you use does not support this function.

5.3. Setting Holiday Mode

The holiday mode sets the indoor unit to en-
ter the holiday mode.
● The holiday mode sets duration operation
for up to 72 hours or no-time-limit opera-
tion (displayed as "
● The duration is adjusted by 1 hour.
<<Setting>>
Hold down the
more. The indicator blinks.
Press the or
ration, and press the
setting. When the set duration shows "
this indicates no time limit operation is set.
When transmission starts, the
indicators blink.
The indicator stops blinking to com-
plete the setting.
<<Cancelling>>
To cancel the mode, hold down the
ton for 3 seconds or more while the indoor
unit is operating in the holiday mode.
button for 3 seconds or
").
button for 3 seconds or
button to adjust the du-
button to save the
, and
but-
",
9