Before Operation - Mitsubishi Electric ATW PAR-WT40R-E Operation Manual

4

Before Operation

Remove the battery case cover before plac-
ing the wireless remote controller, and place
two size AA alkaline batteries properly.
* When the wireless remote controller is not
paired, it has to go through a pairing process.
For details about pairing, contact the technician
or installer.
■ Batteries
● Lighting of the battery life indicator indi-
cates that the batteries are running out.
Replace them with two new size AA alka-
line batteries.
● Do not use Ni-Cd rechargeable batteries.
● The size AA alkaline batteries used on the
wireless remote controller last for about 1
year .
● When not using the wireless remote con-
troller for long periods of time, have the
batteries removed.
Caution
Always place batteries with correct po-
larities as indicated in the battery case.
■ Installation
The wireless remote controller has two meth-
ods of installation, using an included bracket
or stand.
<< Using a bracket >>
Determine the positions for installing the
wireless remote controller.
Fix the bracket with the included flat head
screws.
Mount the wireless remote controller onto
the bracket.
Note)
● Avoid over-tightening the screws, which may break or deform the bracket.
● To enhance stability, use all the four screws to secure the bracket.
5