Assembling And Installing The Rear Brake Master Cylinder - Yamaha 2004 YP400 Service Manual

a
FRONT AND REAR BRAKES
6. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
7. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00596
ASSEMBLING AND INSTALLING THE
REAR BRAKE MASTER CYLINDER
WARNING
_
• Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
• Never use solvents on internal brake
components.
1. Install:
• brake master cylinder kit 1
• circlip 2
• dust boot 3
4 - 28
CHAS
Recommended brake fluid
DOT 4
New