Assembling And Installing The Front Brake Master Cylinder - Yamaha MIO Service Manual

FRONT BRAKE
4. Check:
• brake hose 1
Cracks/damage/wear → Replace.
EAS00598
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
For assembly and installation, reverse the dis-
assembly and removal procedure.
WARNING
_
• Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
• Never use solvents on internal brake
components.
Recommended brake fluid
DOT 4
NOTE:
_
If DOT 4 brake fluid is not available, DOT 3
brake fluid can be used.
1. Install:
• brake hose
• brake hose holder
2. Install:
• brake fluid baffle plate 1
• brake master cylinder reservoir diaphragm
• brake master cylinder reservoir diaphragm
holder
• brake master cylinder reservoir cap
NOTE:
_
Install the brake fluid baffle plate in the direc-
tion shown.
6 - 27
CHAS
7 Nm (0.7 m · kg, 5.1 ft · lb)