Yamaha MIO Service Manual page 236

LT
1
New
FRONT FORK
3. Tighten:
• damper rod assembly bolt 1
NOTE:
_
While holding the damper rod assembly with
the hexagon socket wrench (10 mm) 2 and
T-handle 3, tighten the damper rod assembly
bolt.
T-handle
90890-01326
4. Install:
• oil seal 1
(with the fork seal driver attachment 2 and
fork seal driver weight 3)
Fork seal driver weight
90890-01184
Fork seal driver attachment
90890-01186
CAUTION:
_
Make sure the numbered side of the oil seal
faces up.
NOTE:
_
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 4 to pro-
tect the oil seal during installation.
6 - 36
CHAS
23 Nm (2.3 m · kg, 17 ft · lb)
New
LT