Installing The A.c. Magneto - Yamaha MIO Service Manual

A.C. MAGNETO
EAS00354

INSTALLING THE A.C. MAGNETO

For installation, reverse the removal proce-
dure.
1. Install:
• stator coil assembly 1
• stator coil assembly bolts
• pickup coil
• pickup coil bracket 2
• pickup coil bracket screws
NOTE:
Pass the stator coil lead under the pickup coil
bracket.
2. Install:
• woodruff key
• A.C. magneto rotor 1
• washer
• A.C. magneto rotor nut
NOTE:
_
• Clean the tapered portion of the crankshaft
and the A.C. magneto rotor hub.
• When installing the A.C. magneto rotor,
make sure the woodruff key is properly
seated in the keyway of the crankshaft.
3. Tighten:
• A.C. magneto rotor nut 1
NOTE:
_
While holding the A.C. magneto rotor 2 with
the rotor holding tool 3, tighten the A.C. mag-
neto rotor nut.
Rotor holding tool
90890-01235
4 - 63
ENG
11 Nm (1.1 m · kg, 8.0 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
70 Nm (7.0 m · kg, 50 ft · lb)