Installing The Engine; Engine Assembly; Rear Shock Absorber Assembly Bolt; Cable And Hose - Yamaha MIO Service Manual

INSTALLING THE ENGINE

EASF0019
INSTALLING THE ENGINE

ENGINE ASSEMBLY

WARNING
_
Securely support the motorcycle so there
is no danger of it falling over when install-
ing engine.
1. Install:
• engine assembly
• engine mounting bolt
• washer
• engine mounting nut
REAR SHOCK ABSORBER ASSEMBLY
BOLT
1. Install:

• rear shock absorber assembly bolt

CABLE AND HOSE

1. Install:
• rear brake cable
• rear brake cable holder
• rear brake cable holder screws
2. Connect:
• cylinder head breather hose
• vacuum hose
3. Adjust:
• rear brake lever free play
Refer to "ADJUSTING THE REAR BRAKE"
in chapter 3.
4 - 4
ENG
59 Nm (5.9 m · kg, 43 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)