Assembling The Kickstarter; Installing The Kickstarter - Yamaha MIO Service Manual

1
2
b
a
KICKSTARTER
EAS00340

ASSEMBLING THE KICKSTARTER

1. Install:
• spacer
• kickstarter spring
• kickstarter shaft
• washer
• circlip
• oil seal
NOTE:
_
• Hook the straight end of the kickstarter
spring onto the notch 1 in the kickstarter
shaft and hook the hooked end of the kick-
starter spring onto the projection 2 as
shown.
• Install the circlip securely into the groove on
the kickstarter shaft.
2. Install:
• kickstarter pinion gear clip
• kickstarter pinion gear
• kickstarter shaft plate
• kickstarter shaft plate screws

INSTALLING THE KICKSTARTER

For installation, reverse the removal proce-
dure.
1. Install:
• dowel pins
• V-belt case cover
• fuel overflow hose holder
• V-belt case cover bolts
2. Install:
• kickstarter crack 1
• kickstarter crack bolt
NOTE:
1 _
To install the kickstarter crank, align the notch
a in the kickstarter crank with the projection
b on the V-belt case cover.
4 - 42
ENG
New
New
9 Nm (0.9 m · kg, 6.5 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
12 Nm (1.2 m · kg, 8.7 ft · lb)