Yamaha MIO Service Manual page 237

FRONT FORK
5. Install:
• oil seal clip 1
NOTE:
_
Adjust the oil seal clip so that it fits into the
outer tube's groove.
6. Install:
• dust seal 1
(with the fork seal driver weight 2)
Fork seal driver weight
90890-01184
7. Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
57 cm
Recommended oil
Fork oil 10 W or equivalent
Front fork leg oil level a (from
the top of the inner tube, with the
inner tube fully compressed and
without the fork spring)
88 mm (3.46 in)
NOTE:
_
• While filling the front fork leg, keep it upright.
• After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
8. Install:
• fork spring 1
NOTE:
_
Install the fork spring with the smaller pitch fac-
ing up.
6 - 37
CHAS
New
New
3
(2.01 Imp oz, 1.93 US oz)