Sanyo ASW U1100T Service Manual page 17

TROUBLE
c. Wash/ Rinse
Washing cycle
does not start
even if water
keeps the selected
water level.
The Spin Tub
rotates together
with the Pulsator
during washing or
rinsing cycle.
INSPECTION
Does the Spin Tub
rotate normally when
the SELECT button is
set to SPIN ?
Yes
Does the Pulsator
rotate by hand ?
Yes
Does humming noise
come on from motor ?
Yes
Is the Magnetic Coil
working normally ?
No
Does brake work
normally ?
CAUSES
Bearing Ass y is
No defective.
Poor connection of the 14
pin connectors.
Thermostat on motor is
opened
P.C.B Complete is
defective.
Bearing Ass y is
No defective
Unnecessary materials
lock pulsator operation.
Motor wires are
No
disconnected.
Capacitor s wires are
disconnected.
Capacitor is defective
Motor coil is shortened
Brake lining on Bearing
Yes
Ass y is worn out
Brake Lever Ass y is
defective.
Magnetic Coil is
damaged.
Brake lining is worn out
No
Brake Lever Ass y is
defective.
- 16 -
REMEDY
Replace
Replace
Repair or replace after
cooling down
Replace
Replace
Take out
Repair or replace
Repair or replace
Replace
Replace
Replace Bearing
Ass y
Replace Bearing
Ass y
Replace
Replace Bearing
Ass y
Replace Bearing
Ass y