Sony DWR-R02D User Manual page 20

Confirming the device types and IP
addresses of devices registered in the
device list window
Display the "Device information" window using one of the
following methods.
• Select a device in the device list, and click the "Device
Information" button in the upper part of the device list
window.
• Right-click a device in the device list, and select "Device
information" in the context menu that appears.
Manually adding a receiver/RMU-01 to the
device list window
Display the "Add a new device" window using one of the
following methods.
• Click the "+" button in the upper part of the device list
window.
• Select "Device menu > Add a new device."
After entering the following items in the window that
appears, click "OK" to close the window.
The receiver/RMU-01 unit is added to the device list
window.
IP Address: Enters the IP address of the receiver/RMU-01
to be added.
Receiver: Selects the model of the receiver you want to
add.
RMU (remote control unit): Selects the model of the
remote control unit you want to add.
To cancel the addition of a receiver/RMU-01 unit
Click "Cancel".
Context window
Right-click on a node in the device list window to display
the context window.
Property: Displays the "Property" window for the
selected device.
For details on the Property window, see "Property
Window" on page 28.
Device information: Displays information about the
selected device.
20
Device List Window
For more information on the contents, see "Confirming
the device types and IP addresses of devices registered in
the device list window" on page 20.
Add to Status Viewer: Adds the selected receiver channel
to the status viewer in the main window.
When you right-click a receiver, the receiver channel for
that receiver is added to the status viewer.
Connect: Reconnects to receivers and RMU-01 units for
which communication with Wireless Studio has been
interrupted.