Scanning And Saving A Film To A Memory Card - Epson Stylus Photo RX620 series Basic Operation Manual

Scanning and Saving a film to a
Memory Card
1. Set a film on the document table.
& See "Loading and Setting Film on the
Document Table" on page 20
2. Load a memory card.
& See "Inserting Memory Cards" on page 11
Press the Film button to enter the Film Mode.
3.
4. Select Scan to Memory Card.
5. Select the film type.
& See "Selecting the Film Type" on page 23
6. Select the desired photo and enter the check
mark of the photo you want to save.
1
7. Select the Quality option by pressing the l/r
buttons.
Scan quality affects the file size of the images. Be
sure to leave enough space according to the
following table:
Quality Scanning
resolution
1200 × 1200 dpi
Fine
2400 × 2400 dpi
Photo
Press the x Color or x B&W button to start
8.
scanning.
Cancel OK
1. Select
the desired
2
photo.
2. Enter the
check
Cancel OK
mark.
Approximate
file size
500 KB
4.8 MB
9. Confirm that the images were saved correctly
and press the OK button.
Scanning to a Memory Card
25