Transporting This Product - Epson Stylus Photo RX620 series Basic Operation Manual

Transporting This Product

If you need to transport this product, carefully
repack it using the original box (or a similar box that
this product fits snugly into) and packing materials
as follows:
Caution:
c
❏ When storing or transporting this product, do
not tilt it, stand it on its side, or turn it upside
down. Otherwise ink may leak from the
cartridge.
❏ Leave the ink cartridges in their installed
positions when transporting this product;
removing the cartridges for transportation
may damage this product.
1. Remove all paper from the sheet feeder and
make sure that this product is off.
2. Open the scanner unit.
3. Pick up the protective material from the storage.
4. Install it in the secure position. Finally, close the
scanner unit.
5. Close the scanner unit.
6. Open the document cover and slide the
transportation clamp to lock the scanner
carriage.
7. Unplug the power cord from the electrical outlet
and document cover's cable from the TPU
interface connector.
8. Remove the paper support and close the output
tray.
9. Attach the protective materials to both sides of
this product, and then repack this product and
attachments in the box.
10. Keep this product on a flat surface to protect it
from shocks during transportation.
Note:
Do no forget to remove the protective materials from this
product before using it again.
Maintenance and Transporting
33